+86-15371769898
[email protected]
+86-15371769898[email protected]Hypalon is not one specific rubber anymore. It is the former DuPont trademark for chlorosulfonated polyethylene (CSPE), a synthetic rubber family that still appears on industrial roller specifications long after the original branded product was discontinued. The practical conclusion for buyers: spe...
read moreOn a film extrusion line, a heating roller may look like a simple steel cylinder, but when the edge zone runs 8°C cooler than the center, the operator raises the setpoint and the final product becomes too soft. That temperature difference is not a control system fault. It is a mechanical fault in h...
read morePicture a packaging plant with two production lines a few metres apart. On one line, rubber rollers in the coating station keep hardening and developing tiny cracks after a few months. On the next line, rollers in the laminating station swell, soften, and need replacement on a tight schedule. The f...
read morePicture a rubber roller sitting near a heat source and exposed to outdoor ozone all day. Within months, the surface hardens, fine cracks appear, and the line has to stop for a replacement cost nobody budgeted for. That failure pattern is exactly why EPDM material exists. EPDM material—ethylene prop...
read moreWhen a roller in your rotation, conveying, or coating line starts picking up material, wearing flat, or requiring frequent replacement, the cost goes far beyond the replacement part. It shows up as downtime, rework, and inconsistent product quality. Polyurethane rollers are often the answer because...
read moreA maintenance engineer spots faint orange-brown streaks on a chrome-plated roller during a routine line inspection. The immediate question is simple: does chrome plating rust? The short answer is that chromium itself does not rust, because it forms a dense, self-repairing oxide film. The practical ...
read moreQuick Answer: What an Anilox Roller Does An anilox roller is a precision-engineered metering device covered in thousands of microscopic cells that pick up a controlled volume of ink and transfer it evenly to the printing plate in flexographic printing. Each cell acts as a tiny, fixed-volume reservo...
read moreChoosing the right anilox roller comes down to matching three specifications to your print job: cell volume (measured in BCM, or billion cubic microns per square inch), line screen (LPI, lines per inch), and cell shape and angle. As a general rule, process color printing needs a higher line screen a...
read moreA hard alloy coated roller is a steel roller with a wear-resistant metallic layer applied to its working surface to withstand abrasion, high contact pressure, and heat that would quickly destroy an uncoated roller. The coating is typically applied through thermal spray processes (HVOF or plasma spra...
read moreDedicated to developing and manufacturing various shapes of rolls with different roll structures.
Phone: +86-15371769898
Email: [email protected]
Add: 9 Lifa Avenue, Chengdong Town, Haian County, Nantong City, Jiangsu Province, China
Copyright© 2025 Jiangsu Jinhang Machinery Manufacturing Co., Ltd. All Rights Reserved.
Custom Thin Walled Roller Manufacturers
English
русский
Deutsch